Leitz mpv 2 microscope photometer instructions manual

Leitz mpv 2 microscope photometer instructions manual. Available to purchase for immediate download. Below is an extract from the manual converted to text for a quick impression on the content. Leitz mpv 2 microscope photometer instructions manualMPV 2 Microscope PhotometerOptical Adjustement Centre the low-power light source insert the diffusion disc Centre the photometer light source Insert the diffusion disc (unnecessary with fluorometry) Set up the adjustment sample at low to medium magnific- ation (low-power illumination) For measurements in polarized light only: Centre the objectives. set the polarizer Swing out the field lens Only when the grating monochromator is used: Insert the 0.5mm pair of slits Set the stray light filter turret (390-80onm) Centre and focus the field diaphragm of the photometer Adjust the monochromator slit With reflection measurements also set the aperture dia- phragm and half stop. Insert the pair of slits for the band width required. Place the sample on the object stage. select the desired objective. for transmitted light also select the condenser objective and. if necessary. set the aperture diaphragm. Disengage the short-circuit lens. Centre the measuring diaphragm. Adjust the measuring diaphragm illumination (pilot light). Determine the size of the measuring field. Adjust the field of Illumination to the measuring field. Set the desired spectral region by means of the mono- chromator or filter. If necessary refocus object and field diaphragm.