Single exposure attachment for mamiya c330 manual
- Brand: Mamiya
- Product Code: 3303
- Availability: 1
Single exposure attachment for mamiya c330 manual . Available to purchase for immediate download. Below is an extract from the manual converted to text for a quick impression on the content. Single exposure attachment for mamiya c330 manualSINGLE EXOSURE ATTACHEMENT FOR MAMIYA 330 By using this single exposure attachment, single exposures of dry plates (23 >< 38 inch or 6.5 9cm) or cut film (one quarter size of 435 re: 62 inch. 255 32 inch, or 6.5 9cm) can be made economically and effectively. SlNGLE EXPOSURE BACK i, am"- PARTS NOMENCLATURE gird/f g} __Q) Single exposure back 1. Back cover catch button i 2. Outer frame i 3. Holding frame it 4. Outer frame catch Plate holder model 2 if. '. 5, fit-fir in ~~ f'w. cheap-Gard m CD til. b. Dark slide ll. 6, Lock lever ll 7. Plate carrier l' " l , ' 8. Film sheath rx . \\\ QCHANGING THE BACK COVER Replace the camera back cover with the single exposure back. Dotaching Method Release the back cover catch button and open the back cover halfway. In this condition, slide the back cover in the arrow direction (as shown in the photo) while pressing the back cover hinge release until the back cover is detached. When replacing the back cover with the tripod attached. it is easily detached after fully opening the back cover by sliding it horizontally. while pressing the tip of the back cover hinge release from the inner side of the back cover. Attaching Method When installing the back cover. press the hinge release with the hinge portion of the cover while inserting the hinged shaft of the back cover in the body receiver, sliding the back cover in the reverse direction from detaching it In this manner, the back cover can be simply installed.